Urla Yacht Watermaker — Haul-Out & Refit Installation

On-site watermaker installation at Urla boatyards and private storage areas

Water Independence from Urla

Urla, on the inner shore of the İzmir Peninsula, is a quiet boating hub built around private boatyards, refit facilities and small mooring areas rather than a single large marina. Yachts based here typically spend extended periods ashore — winter layup, annual maintenance, or full refit. Seacraft Watermakers installs watermakers directly at Urla boatyards and mooring points, including haul-out storage. The refit season is the ideal time to add a watermaker to your boat's systems.

Urla at a Glance
  • Urla, İzmir — Aegean Region
  • Year-round (winter layup & refit hub)
  • Salinity: 3.8%
  • Private boatyards and refit facilities
  • Sailing yacht, catamaran, motor yacht
  • On-site installation & service

Why Install a Watermaker During Your Refit?

Easy Access, No Schedule Pressure

With your yacht on the hard, routing pipes, mounting the system and connecting electrics is straightforward. Installation can be coordinated alongside painting, engine work or any other maintenance in your schedule.

Ready When You Launch

Install during the layup season and your yacht produces its own water from the moment it goes back in the water. No marina connections to hunt for, no queuing at the dock.

Aegean Salinity — 3.8%

The waters off the İzmir Peninsula are ideal for reverse osmosis. SCW membranes are engineered for this salinity range and deliver consistent output throughout the sailing season.

Which Watermaker for Your Yacht?

Capacity is a personal choice — not a function of boat size

The right model depends on your crew size, daily consumption habits and power setup — not just your yacht's length. Seacraft's technical team can help you choose.
SCW-30

30 L/hr  |  12V DC

Small sailing yacht, minimal crew, low consumption preference

View
SCW-50

50–60 L/hr  |  12V DC

Sailing yacht, catamaran

View
Most Popular
SCW-100

100 L/hr  |  230V / 50Hz

Sailing yacht, catamaran, small motor yacht

View
SCW-150

150 L/hr  |  230V / 50Hz

Motor yacht, gulet, large sailing yacht

View
SCW-350

350 L/hr  |  230V / 50Hz

Large motor yacht, superyacht, large gulet

View

On-Site Installation — Urla and Çeşmealtı

Seacraft Watermakers provides on-site installation and technical service across Turkey. Our team comes directly to your boat — no need to move to another location.

We cover private boatyards, haul-out storage areas and mooring points throughout the Urla area, including Çeşmealtı and surrounding bays. Contact us to plan installation around your existing maintenance schedule.

  • Urla harbour and fishing quay
  • Çeşmealtı haul-out and mooring areas
  • Private boatyards and refit facilities in the Urla area
  • Güzelbahçe, Özbek and surrounding bay mooring points
Book a Vessel Survey
Get in Touch

+90 252 412 90 78

info@seacraftwatermakers.com

Mon – Sat: 09:00 – 18:00

Frequently Asked Questions

Yes. Haul-out is actually the best time for watermaker installation. The boat is accessible, there's no schedule pressure, and we can coordinate with your other maintenance work. Contact us to book.

Capacity depends on your crew size and daily water habits, not your yacht's length. A sailing couple may find 30–50 L/hr perfectly adequate; a larger crew or motor yacht may need 100–350 L/hr. Our technical team will recommend the right model based on your specific setup.

The SCW-30 (30 L/hr) and SCW-50 (50–60 L/hr) both run entirely on 12V DC — no inverter required. If you have shore power, the SCW-100 (230V) gives you higher output.

A standard installation is typically completed within one working day. A pre-installation inspection is carried out on-site beforehand.

Annual filter service and membrane check is recommended. All maintenance is carried out on-site — your yacht stays where it is.

Seacraft is Turkey's domestic watermaker manufacturer. Every electronic automation module is produced in-house, and spare parts are always in local stock. With imported brands, a failed component can mean waiting weeks for a part to arrive — in Urla, during your haul-out or refit. With Seacraft, you call, we come. CE and ISO 9001 certified production, 2-year warranty included.

Book a Watermaker Installation in Urla

We come to your boatyard or mooring — haul-out or afloat

Book an Appointment Call Us: +90 252 412 90 78