Kemer Yacht Watermaker — G-Marina Kemer

On-site installation at one of the Mediterranean's finest liveaboard marinas

Water Independence in Kemer

G-Marina Kemer sits at the foot of the Taurus Mountains, sheltered by peaks that give this stretch of the Turkish Riviera the best climate in the country. With 230 sea berths, 140 hard-standing places, a 55-ton travel lift and Five Golden Anchors from the Yacht Harbour Association of the UK, it is consistently rated one of the best liveaboard marinas in the entire Mediterranean. The marina is also a Port of Entry — all official clearance offices are on-site. Seacraft Watermakers installs and services watermakers at G-Marina Kemer — no relocation required.

Kemer at a Glance
  • Kemer, Antalya — Turkish Riviera
  • Year-round (liveaboard hub)
  • Salinity: 3.9%
  • 230 sea + 140 land berths
  • Sailing yacht, catamaran, motor yacht
  • On-site installation & service

G-Marina Kemer

  • 230 sea + 140 land berths; year-round operation
  • 55-ton travel lift + 20-ton mini boat carrier; up to 100 yachts on the hard simultaneously
  • Five Golden Anchors (TYHA, UK); Port of Entry — all official offices on-site
  • Engine, electrical, carpentry, fibreglass, paint and sail workshops
  • Taurus Mountains shelter; ~1 hour from Antalya Airport
  • Liveaboard infrastructure; gateway to Phaselis and the Lycian coast

Which Watermaker for Your Yacht?

Capacity is a personal choice — not a function of boat size

The right model depends on your crew size, daily consumption habits and power setup — not just your yacht's length. Seacraft's technical team can help you choose.
SCW-30

30 L/hr  |  12V DC

Small sailing yacht, minimal crew, low consumption preference

View
SCW-50

50–60 L/hr  |  12V DC

Sailing yacht, catamaran

View
Most Popular
SCW-100

100 L/hr  |  230V / 50Hz

Sailing yacht, catamaran, small motor yacht

View
SCW-150

150 L/hr  |  230V / 50Hz

Motor yacht, gulet, large sailing yacht

View
SCW-350

350 L/hr  |  230V / 50Hz

Large motor yacht, superyacht, large gulet

View

Why a Watermaker in Kemer?

Year-Round Liveaboard

G-Marina Kemer is built for extended stays. Sailors living aboard for the winter or longer benefit enormously from water independence — no queuing at the dock tap, no supply restrictions, lower running costs.

Mediterranean Salinity — 3.9%

The waters off Kemer are ideal for reverse osmosis. SCW membranes are engineered for this salinity range and deliver consistent output throughout the year.

Phaselis and the Lycian Coast

Routes south from Kemer pass ancient Phaselis, Olympos, Çıralı and dozens of unspoilt Lycian coves. Water independence makes these passages straightforward — many of these anchorages have no shore facilities at all.

On-Site Installation — G-Marina Kemer

Seacraft Watermakers provides on-site installation and technical service across Turkey. Our team comes directly to your boat — no need to move to another port.

  • G-Marina Kemer (afloat and on the hard)
  • Kemer surrounding bays and anchorages
Book a Vessel Survey
Get in Touch

+90 252 412 90 78

info@seacraftwatermakers.com

Mon – Sat: 09:00 – 18:00

Frequently Asked Questions

Capacity depends on your crew size and daily water habits, not your yacht's length. A sailing couple may find 30–50 L/hr perfectly adequate; a larger crew or motor yacht may need 100–350 L/hr. Our technical team will recommend the right model based on your specific setup.

The SCW-30 (30 L/hr) and SCW-50 (50–60 L/hr) both run entirely on 12V DC — no shore power or inverter required. If you have a generator or shore connection, the SCW-100 (230V) gives you higher output.

Yes. G-Marina Kemer is a Port of Entry with all official offices — customs, immigration, harbour authority — located within the marina. Visiting yachts can complete all entry and exit formalities on-site.

For liveaboards, a watermaker is one of the most impactful systems on board. You produce your own water continuously, removing any dependency on marina supply. Over a full season or winter layup, the cost savings on marina water charges are also significant.

A standard installation is typically completed within one working day. A pre-installation inspection is carried out on-site beforehand.

Seacraft is Turkey's domestic watermaker manufacturer. Every electronic automation module is produced in-house, and spare parts are always in local stock. With imported brands, a failed component can mean waiting weeks for a part to arrive — in Kemer, in the middle of your season. With Seacraft, you call, we come. CE and ISO 9001 certified production, 2-year warranty included.

Book a Watermaker Installation in Kemer

We come to your boat — G-Marina Kemer, afloat or on the hard

Book an Appointment Call Us: +90 252 412 90 78