Datça Yacht Watermaker — On-Site Installation & Service

Serving Kairos Marina at Körmen and the full length of the Datça Peninsula

Water Independence on the Datça Peninsula

The Datça Peninsula is one of the Aegean's best-kept secrets — 250 kilometres of coastline, more than fifty sheltered bays, and almost none of them connected to shore water. From Knidos at the tip to Palamutbükü, Mesudiye and the Hisarönü Gulf, a week on the Datça coast means days at anchor with no marina in sight.

Seacraft Watermakers installs and services watermakers directly at Kairos Marina in Körmen, at Datça Harbour, and at anchor throughout the peninsula — no relocation required.

Datça at a Glance
  • Datça, Muğla — Aegean / Mediterranean junction
  • Season: April – October
  • Salinity: 3.8%
  • 1 full-service marina + municipal harbour + 50+ bays
  • Sailing yacht, catamaran, motor yacht, gulet
  • On-site installation & service

Where to Find Us in Datça

On-site installation and service available at all Datça berthing points and surrounding anchorages.

Kairos Marina (Körmen)

Körmen, Datça / Muğla

The peninsula's only full-service marina, located in Körmen Bay with approximately 246 sea and 256 land berths for vessels up to 40m LOA. 100-ton travel lift, water, electricity, Wi-Fi and fuel dock on-site. Also the terminal for the Bodrum–Datça ferry service.

Datça Harbour (Municipal)

Datça Town Centre, Muğla

Town-centre jetty with approximately 40-berth capacity. Short-stay berthing with customs and agency services available. Maximum 5m depth. A practical transit stop for yachts visiting the town.

Which Watermaker for Your Yacht?

Capacity is a personal choice — not a function of boat size

The right model depends on your crew size, daily consumption habits and power setup — not just your yacht's length. On the Datça Peninsula, 12V DC models are particularly valuable — they run at anchor with no shore power at all. Seacraft's technical team can help you choose.
SCW-30

30 L/hr  |  12V DC

Small sailing yacht, minimal crew, low consumption preference

View
Best for Sailing Yachts
SCW-50

50–60 L/hr  |  12V DC

Sailing yacht, catamaran

View
Most Popular
SCW-100

100 L/hr  |  230V / 50Hz

Sailing yacht, catamaran, small motor yacht

View
SCW-150

150 L/hr  |  230V / 50Hz

Motor yacht, gulet, large sailing yacht

View
SCW-350

350 L/hr  |  230V / 50Hz

Large motor yacht, superyacht, large gulet

View

Why a Watermaker on the Datça Peninsula?

Fifty Bays, Zero Shore Water

The bays of the Datça Peninsula — Knidos, Palamutbükü, Hayıtbükü, Mesudiye — have no marina water connections. A watermaker is not a convenience here; it is the only reliable source of fresh water during an extended peninsula cruise.

Aegean Salinity — 3.8%

The water surrounding Datça is ideal for reverse osmosis. SCW membranes are engineered for this salinity range and deliver consistent output across the full sailing season.

April to October Season

Datça's calm and uncrowded character draws sailors who stay longer. The longer you stay, the more critical water independence becomes. A watermaker lets you follow the wind rather than the nearest marina.

On-Site Installation — Kairos Marina and the Datça Peninsula

Seacraft Watermakers provides on-site installation and technical service across Turkey. Our team comes directly to your boat — no need to move to another port.

Beyond the marinas, we cover Palamutbükü, Knidos, Mesudiye, Hayıtbükü and the Hisarönü Gulf — contact us with your location and we'll arrange a visit.

  • Kairos Marina (Körmen)
  • Datça Harbour
  • Palamutbükü
  • Knidos and surrounding bays
  • Mesudiye / Hayıtbükü
  • Bozburun / Hisarönü Gulf
Book a Vessel Survey
Get in Touch

+90 252 412 90 78

info@seacraftwatermakers.com

Mon – Sat: 09:00 – 18:00

Frequently Asked Questions

The SCW-30 (30 L/hr) and SCW-50 (50–60 L/hr) both run entirely on 12V DC — no shore power, no inverter needed. For Datça's anchorage-heavy itineraries, these are the natural choice. If you have a generator or shore power, the SCW-100 (100 L/hr, 230V) gives you more output.

Capacity depends on your crew size and daily water habits, not your yacht's length. A sailing couple may find 30–50 L/hr perfectly adequate; a larger crew or charter boat may need 100–150 L/hr. Our technical team will recommend the right model based on your setup.

Yes. Kairos Marina is one of our regular service locations. Book an appointment and we'll come to your berth — no need to move the boat.

A standard installation is typically completed within one working day. A pre-installation inspection is carried out on-site beforehand.

Yes. We cover Palamutbükü, Knidos, Mesudiye, Hayıtbükü and the Hisarönü Gulf. Contact us with your anchorage position and we'll arrange a visit.

Book a Watermaker Installation in Datça

We come to your boat — Kairos Marina, Datça Harbour and peninsula bays

Book an Appointment Call Us: +90 252 412 90 78