Antalya Yacht Watermaker — On-Site Installation & Service

Serving Kaleiçi Harbour and Setur Antalya Marina on Turkey's Mediterranean coast

Water Independence in Antalya

Antalya offers two very different berthing experiences. Kaleiçi Harbour — enclosed within Roman walls and in continuous use since at least the 4th century BC — is one of the Mediterranean's most atmospheric ports, popular with day-trip boats and visiting yachts. Setur Antalya Marina, inside the commercial harbour breakwater since 1991, is a modern full-service facility with 385 berths, twin travel lifts up to 200 tons, a mega-yacht jetty for vessels up to 90m, and international clearance. Seacraft Watermakers installs and services watermakers at both locations — no relocation required.

Antalya at a Glance
  • Antalya — Turkey's Mediterranean Coast
  • April–November (long season)
  • Salinity: 3.9%
  • Two marina options
  • Sailing yacht, catamaran, motor yacht
  • On-site installation & service

Two Marinas, One City

Kaleiçi Harbour
  • Inside the Roman city walls, heart of the historic old town
  • ~100 berth capacity; 6–7m depth; mooring buoy system
  • Popular with day-trip boats and visiting yachts
  • Fuel, electricity, water, mooring and dive services on-site
  • Technical workshops and nautical suppliers within the harbour
  • Operated by Antalya Metropolitan Municipality
Setur Antalya Marina
  • Inside the commercial harbour breakwater; operating since 1991
  • 235 sea + 150 land berths; up to 90m LOA; mega-yacht jetty
  • 75-ton and 200-ton travel lifts; 30,000m² haul-out area; 900m² hangar
  • International port of entry (clearance available)
  • 10 km from city centre; 30 km from Antalya Airport

Which Watermaker for Your Yacht?

Capacity is a personal choice — not a function of boat size

The right model depends on your crew size, daily consumption habits and power setup — not just your yacht's length. Seacraft's technical team can help you choose.
SCW-30

30 L/hr  |  12V DC

Small sailing yacht, minimal crew, low consumption preference

View
SCW-50

50–60 L/hr  |  12V DC

Sailing yacht, catamaran

View
Most Popular
SCW-100

100 L/hr  |  230V / 50Hz

Sailing yacht, catamaran, small motor yacht

View
SCW-150

150 L/hr  |  230V / 50Hz

Motor yacht, gulet, large sailing yacht

View
SCW-350

350 L/hr  |  230V / 50Hz

Large motor yacht, superyacht, large gulet

View

Why a Watermaker in Antalya?

Mediterranean Salinity — 3.9%

The waters off Antalya are ideal for reverse osmosis. SCW membranes are engineered for this salinity range and deliver consistent, high-efficiency output throughout the sailing season.

April to November Season

Antalya operates one of Turkey's longest sailing seasons. Heavy marina demand during peak months can limit water supply; a watermaker removes that dependency entirely.

The Lycian Coast

Routes west from Antalya to Kemer, Kaş, Finike and the ancient Lycian sites pass through some of Turkey's most spectacular coastline. Water independence makes every passage more straightforward.

On-Site Installation — Antalya

Seacraft Watermakers provides on-site installation and technical service across Turkey. Our team comes directly to your boat — no need to move to another port.

  • Kaleiçi Harbour
  • Setur Antalya Marina
  • Konyaaltı fishing harbour area
Book a Vessel Survey
Get in Touch

+90 252 412 90 78

info@seacraftwatermakers.com

Mon – Sat: 09:00 – 18:00

Frequently Asked Questions

Capacity depends on your crew size and daily water habits, not your yacht's length. A sailing couple may find 30–50 L/hr perfectly adequate; a larger crew or motor yacht may need 100–350 L/hr. Our technical team will recommend the right model based on your specific setup.

The SCW-30 (30 L/hr) and SCW-50 (50–60 L/hr) both run entirely on 12V DC — no shore power or inverter required. If you have a generator or shore connection, the SCW-100 (230V) gives you higher output.

Yes. We service both locations. Tell us where you're berthed and we'll arrange a visit directly to your boat.

Setur Antalya Marina is the designated international port of entry for the area. Kaleiçi Harbour is a municipal facility — visiting yachts requiring clearance should use Setur Marina or arrange through a local agent.

A standard installation is typically completed within one working day. A pre-installation inspection is carried out on-site beforehand.

Seacraft is Turkey's domestic watermaker manufacturer. Every electronic automation module is produced in-house, and spare parts are always in local stock. With imported brands, a failed component can mean waiting weeks for a part to arrive — in Antalya, in the middle of your season. With Seacraft, you call, we come. CE and ISO 9001 certified production, 2-year warranty included.

Book a Watermaker Installation in Antalya

Kaleiçi Harbour or Setur Marina — we come to your boat

Book an Appointment Call Us: +90 252 412 90 78